- To open DIALER, press Menu button, and then Green HW button (the one you use to call) and the dialer will appear! 🙂 It’s not possible to open the dialer from a flash homescreen
- If you want nav3d or task3d, read here , but I’m working on new method which is not fully working yet
- To use the buttons in the top bar of the Special Homescreen (bluetooth, wifi, clock) you have to keep you finger pressed for 1 second on the button! There is a timer!
- For those saying “faenilator does not start” : as written in the changelog, faenilator is a QT software, this means that you’ll need to install qt libraries with the QT INSTALLER to use it! There are no problems at all with the faenilator icon in the homescreen 😉
- I DO NOT POST COMMENTS ON MY BLOG I ONLY ANSWER TO YOUR COMMENTS SO IF YOU HAPPEN TO READ COMMENTS BY faeniI, IT’S NOT ME! THIS GUY IS ALSO TRYING TO SIMULATE FAKE COMMENTS, SO IF YOU READ SOMETHING WHICH IS SUSPICIOUS, IT MEANS IT HAS NOT BEEN WRITTEN BY ME! I have no time to look after babies, so starting from tomorrow, THE BLOG WILL BE FOR REGISTERED USERS ONLY! When you give things to humans, they always need to make abuse of them…
That’s all for today 😉
It’s 1:50am, my train leaves at 6am, 3:30hours left to sleep…
cya tomorrow guys, I hope you’re enjoying n2o4 😉
41 thoughts on “Answer to most asked questions”
Is it true that you made n2oo3 with spyware installed on it? See link below…
That was long time age, but I don’t do it anymore 😉
Pierluigi, you should really stop wasting your time and do something constructing!
THE BLOG WILL BE FOR REGISTERED USERS ONLY! So play as much as you want.
All you see above is fake!
This is exactly what I said, don’t trust anything that is SUSPICIOUS! I don’t care if I get my donation or not, I will make this board for REGISTERED USERS ONLY! 😐
thats bad ppl… u dump asses…
It doesn’t matter hd, from tomorrow all this will be over!
I didn’t write this! People, don’t trust anyone with the nick faenil!
This is all wrong! stupid asses! 😆
Just ignore faenil and see my need for donation! I prefer giving you chances to win instead of giving these softwares via n2o4 releases 😉
hey got the solution for bluetooth icon on n204 new homescreen. no need to press and hold it. it waste our time by doing so. so here is the solution install BT SWITCH a freeware app. now ur bt homescreen icon works perfectly. no need to press n hold now. just single press,it gets on, another press it gets off with ease. its a freeware, so here i upload it. its only 11 kb so dnt get afraid
u will get ur donation soon from me bro for this superb rom coz u deserve this.its strike here will take sometime. 1 more thing the icons of ur homescreen r super ugly hihihihi
dude u wrote not to read a name faenil comments then we will not read… chill… no need of worry..
You have a train?
WoW! So Nice! 😯
Ciao faenil, lavoro straordinario, complimenti, ma ti richiedo una cosa: non si potrebbe avere stratbackup anche per n2o3? Grazie!!!!
Inoltre ho visto che in tutte le ROM modificate all’avvio esce la scritta i8910 HD, c’è un modo per riavere la scritta Omnia HD??
ROMs fantastic. Just one quick question as this may be a bug or just my failure to see.
I installed the n204 no gadget, then added powerboot and 3dtask etc…
But with this theme, it does not display whether your on 2G or 3G just shows you the antenna bars…
Is this a bug? or is this part of the theme?
Ah faenil un’altra cosa: le icone in basso nella homescreen ci sono solo colorate o si possono avere anche in bianco e nero? Perché colorate non le sopporto!! 😛
I just don’t understand the descriptions in the download link page of n204.
Which one of these three should download if I want a 100% perfect working Samsung Touchwiz home-screen? 1,2 or 3 ? thanks
#1: N2o4 Base with gadget in E (special hs) ———– MIRROR
#2: N2o4 Base without gadget in E (working widget hs)
#3: N2O4 Base with NON-KS MENU
Faenil, I suppose this is a question thread, so I will ask:
1) How come you include WDR as default ON…??? WDR is only useful in lowlight! Most of the time we are using the cam to shoot outdoors~~~~~ 🙄
For this reason alone, I cannot flash to n2o4…. 😕
@Ashtan WDR isn’t just for low light it is for balancing the difference between two different light contrasts
eg shadows outside on a bright day
There is more to it. Google and find out
ciao fenil, ho avuto dei problemi con startbackup e feniletor mi si riavviava il cell e uscivano tante xxx al posto delle lettere, adesso ho formattato ed è tutto ok, ti faccio sapere se succede di nuovo,,,
Friend, try taking an well lit indoor shot with WDR on, and one with WDR off.
Which one produces the more washed out picture?
WDR on during outdoor shots also increases the noise
REALLY WHERE IS THE DIALER BUTTON? 😀
WE ARE USING A PHONE FOR DAILING NUMBERS NOT FOR COOKING!
Green HW Button where?
QUESTO HD E GRANDE BASTARDOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!
il pc non mi vede il tel dopo aver flashato. da cosa può dipendere?
ho rimesso n2o3 ed è ornato tutto ok.
This is a great firmware, love the QT apps, thanks 🙂
Very much enjoying n204! Been changing the icons on the flash homescreen to suit Opera mobile and Ndrive. Would be nice to also add a few more to include specific contacts and extra programs, but not necessary considering its only a few extra button clicks to get to them. Gives me a chance to show off the speed it opens folders.
I do have one suggestion. That is can you please create a rotating keyboard that changes automatically between T9 for portrait and then qwerty when the phone turned on its side? Just a suggestion if you have the time …
Anyone else like this idea?
To open the dialer you have to press the menu button (middle hardware button) and then the call button to the left the menu button. To hang up hit the right hardware button – the three buttons on the bottom of your i8910. Faenil explained this in his post of Q/A about n204. If you hit the call button when on the homescreen it would just show you the numbers you have dialled. It may seem weird, but that is because of the flash homescreen and no other way to do it.
Hope that helped.
bro , i must tell ya ur firmware is the best ever ! its very fast , stable , very good looking , its crazy man ! u’ve done a fkin goooooood job :O ! ill donate asap faenil !
bellisimo questo nuovo firmware! Dopo aver flashato, ho installato in sequenza l’ultimo OviMaps (che mi ha messo un mare di librerie), poi il tuo QTinstaller e poi WikiTude. Però il Faenilator non parte.
Forse il problema è di OviMaps o Wikitude che pure installano varie librerie, e forse hanno sovrascritto qualcosa?
Grazie per l’ottimo lavoro,
can u make a memory card inserted icon? like the patch for n2o3?
thnx for your interest
aggiornamento: ho reinstallato il tuo QtInstaller, ora faenilator parte, ma in ogni bottone tutte le scritte appaiono “ffffff” o “xxxxxx”…
piccolo bug: visualizzando le foto a tutto schermo nella galleria, il nome del file appare disallineato, ossia il bordo nero che contorna la scritta bianca non è sovrapposto correttamente ma spostato di 1 millimetro
How does the phone call works? It cant control the screen while calling. If i turn on the proxy it doesn “opens” the screen if i move the phone off my face.
Hello everyone an explanation why not go Ovi Store?
hi faenil..the chinese localize got bug.. in in new message when u wan to type a word the messaging will exit..in note,calender entry ect all are same..does it mean the chinese localize does not support input chacrater?
pls reply..thanks.n sorry for my bad english..
it’s working perfectly…did you flash the n2o4_chinese_langpack?…
thank u bro
this is fastest CFW ever
BUG : “UPDATE ERROR” when trying to install “n2o3_IWantTask3D” kit!
so… is there any solution to enable 3D-TaskManager??
It’s working perfectly…just tried on my phone…maybe you have some files left in your mmc, delete Private, resource, sys, system folders from your microsd
IT’s too easy to say BUG isn’t it? 🙂
yes.i flash base package first den n2o4_chinese_langpack..
the input method is working man…try making hardreset…or ask guys on dotspy.com
the input is working 100%
i flash base without gadget..does it make any diff if i flash base with gadget?
ok will try again..thanks for replying 😉
yes, u r right 🙂
i have to uninstall “n2o3_IWantNav3D”, and then install “n2o3_IWantNav3D”. they can not install together.
or just install “n2o3_IWantTask3D&NAV3D” to have both of them!
btw it wasn’t a bug really 😉
u know my english is terrible, is not it? ;))
faenil, secondo me c’è bisogno che quando selezioni qualcosa nel faeniletor rimanga una spunta su quello che hai scelto…
le discussioni su quale sia il miglior sistema non mi coinvolgono molto.
le trovo inutili, fuorvianti e tristi.
io so che il tuo lavoro è spettacolare e… pulito, funzionante!
ti chiedo una piccola cosa: come si installa il programma per facebook che hai postato del vivaz?
grazie per il tuo lavoro
you r the best from n2o2 ,n2o3 then the queen n2o4
but we want ovi store case it not work on n2o4
ovi store works on n204 but ovi map does not
ovimaps works ok on n2o4…